How to det up port forwarding planeplotter ddwrt

HOW TO DET UP PORT FORWARDING PLANEPLOTTER DDWRT HOW TO
HOW TO DET UP PORT FORWARDING PLANEPLOTTER DDWRT UPDATE
HOW TO DET UP PORT FORWARDING PLANEPLOTTER DDWRT PC
HOW TO DET UP PORT FORWARDING PLANEPLOTTER DDWRT WINDOWS

Note: if your router firmware iptables supports the multiport module you can use -match option to make your rules set more compact. Iptables -t nat -I PREROUTING -i tun1 -p udp -dport port -j DNAT -to-destination destIP Iptables -t nat -I PREROUTING -i tun1 -p tcp -dport port -j DNAT -to-destination destIP Iptables -I FORWARD -i tun1 -p tcp -d destIP -dport port -j ACCEPT Iptables -I FORWARD -i tun1 -p udp -d destIP -dport port -j ACCEPT Please note that the following rules do NOT replace your already existing rules, you just have to add them.

you need to forward both TCP and UDP packets.

tun1 is the tun interface of your router (please check! on some routers it can be tun0, on Tomato it can be tun11).

port is the port you wish to forward to that device.

destIP is the IP address of the destination device.

Therefore, it is imperative that you do NOT forward ports in the GUI of the router. When connected to the VPN you must forward ports from TUN to LAN. Remember that the router GUI forwards ports from the WAN to LAN. You need to create a basic DNAT on your router. Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.HOW TO FORWARD PORTS TO YOUR DEVICES WITH IPTABLES

HOW TO DET UP PORT FORWARDING PLANEPLOTTER DDWRT UPDATE

Latest builds have a WG update but this concerns Policy Based Routing so does not apply to your situation It is really easy to setup with WireGuardДЄllowed IP's: besides the tunnels subnet, on the server side add the clients subnet, on the client side add the servers subnetДЄctually exactly as described in the guide

HOW TO DET UP PORT FORWARDING PLANEPLOTTER DDWRT PC

Of course the firewall of that PC has to allow traffic coming from another subnet.

HOW TO DET UP PORT FORWARDING PLANEPLOTTER DDWRT WINDOWS

If I want from my Windows client on the client side to get to a Windows client on the server side in Explorer I just type \192.168.6.X and I see the drives on that PC So from the client side 192.168.6.1 is the server and 192.168.6.X are other clients on the servers subnet. I am only routing traffic for 192.168.6.0/24 via the tunnel everything else goes via the ISP You do not need to have all traffic via the tunnel, I have a site-to-site setup to my VPS server, the VPS server has subnet 192.168.6.0/24 Is there a way to enable the inbound firewall and only allow certain ports to be seen over the R7000 ip? now I can access each device by 192.168.0.xД«ut this exposes now the whole network 192.168.0.x adding the R7000 network '192.168.0.1/24' to the allowedIPs on the wireguard server disabling the 'firewall inbound' on the R7000 routes to (client which sits behind the R7000, gets its local IP from R7000 and 443 is opened in the port forwarding) routes internally to (wireguard ip of R7000) I want to access some private service behind the R7000 public like: I dont want to tunnel my own outbounding traffic (should still go over the ISP) With this site-to-site approach, I am opening both networks fully to the other side, correct? If I dont want to have that, is there a possibility to restrict it? Each IP set contains only IPv4 or IPv6 entries, so a couple of sets/rules is necessary. There are many public DoH servers, and filtering them all efficiently relies on IP sets. DoH uses the same port as HTTPS, so we need to filter by the destination IP address. Sorry my build is 'DD-WRT v3.0-r47665 std (11/24/21)' DoT port is unique matching both IPv4 and IPv6 traffic, so filtering by port works well. Take note individual clients can have their own firewall!

You are connecting both Networks that is basically it To give optimal support we do need the router model (you already posted that) but also the build numberД«asically you do not need any port forwarding you need to setup as site-to-site setup as described in the WireGuard Advanced Setup guide. How can I access now 10.0.5.2:443 (which forwards to the internal IP defined on the R7000 (192.168.0.x) instead of returning the ddwrt web ui)?

I can also open a ssh connection at 10.0.5.2 if I disabled the 'Firewall inbound' on the R7000, but I cant reach any other device behind the R7000.ДЎ) access the R7000 ssh port only by the one defined in the remote access management (same for the webui)Дў) access all open ports (+ devices) from the port forwarding section from the wireguard server (for example: I have opened port 443 on the R7000). DD-WRT on R7000 behind an ISP NAT connected to the wireguard server (using 10.0.5.2)Д¬onnection works fine, I can ping the wireguard server and the wireguard server can ping my ddwrt. wireguard server with public IP (using 10.0.5.1)

I have already searched a lot but somehow didnt find the right answer.

HOW TO DET UP PORT FORWARDING PLANEPLOTTER DDWRT HOW TO

Posted: Tue 18:24 Post subject: how to use ddwrt port forwarding with wireguard?

How to det up port forwarding planeplotter ddwrt